Sony HDV HVR-1500 Service Manual page 140

Replacement
1. Disconnecting the connector
Disconnect the flexible card wire from the
connector (CN14) on the DR-428BG board
located on the back side of the MD chassis.
2. Moving the S/T reel tables
Turn the reel shift motor gear by a skewer and
bring the S/T reel tables to the standard cassette
position. (Refer to Section 6-18.)
3. Removing the RMP (S1) retainer
assembly
(1) Remove the precision screw (a) with the S
tension regulator arm assembly drawn lightly
in the arrow direction.
(2) Remove the precision screw (b), then remove
the RMP (S1) retainer assembly.
6-24
CN14
DR-428BG board
Precision screw
(a) P1.4 x 3.5
Precision screw
(b) P1.4 x 3.5
RMP retainer
(S1) assembly
S reel motor assembly
flexible card wire
S tension regulator arm
assembly
Screw (a)
HVR-1500