Disassembly And Replacement; Pocket Block Assembly Removal - Sony SL-2710 Service Manual

SECTION 2
DISASSEMBLY AND REPLACEMENT
1. FLONT PANEL REMOVAL
Remove the headphone volume-knob.
Remove the two screws
Remove the front panel in the direction of arrow
®.
2
0.
9.
@. Disengage the four hooks.
9.
©. Remove the two screws.
2-2. POCKET BLOCK ASSEMBLY REMOVAL
@. Release the both side of the pocket block from
the shaft in the direction of the arrow (@ ,® )
in alphabetical order.
@. Remove the two screws,
@. Remove the microphone jack holder.
@. Remove the FR-8 board in the direction of arrow
®.
@. Disengage the three hooks.
@. Remove the level control block (RV-9 board)
in the direction of arrow ©.
@. Remove the MJ-2 board.
®. Remove the two knobs.
@. Remove the three screws.
@. Remove the PK-2 board in the direction of arrow
©.