Copying And Initializing Settings - Roland JX-305 Owner's Manual

At this time, you can press [UNDO/REDO] to check
the name and sound of the rhythm set that is currently
in the save destination number. After you have found
a rhythm set that you do not mind overwriting, press
[UNDO/REDO] once again to return to the previous
display.
6. Press PAGE [>].
The cursor will move to the beginning of the second
line in the display.
fig.6-32
7. Assign a name to the rhythm set.
Use [INC] [DEC] or the [VALUE] dial to specify the
character.
The following characters can be selected.
Space, A–Z, a–z, 0–9, ! " # $ % & ' ( ) * +, - . / : ; < = > ?
@ [ ¥ ] ^ _ ` {|}
8. Repeat steps 6–7 to input the name.
By pressing PAGE [<] you can move the cursor back
toward the left.
* A name of up to 12 characters can be input.
9. Press [ENTER].
The confirmation screen will appear in the display.
If you decide to cancel the operation, press [EXIT].
fig.6-33
10. Press [ENTER] once again.
fig.0-005
The Rhythm Set Write operation will be carried out,
then the normal display will reappear.
The rhythm set has now been saved.
Chapter 6. Creating an Original Rhythm Set (Rhythm Edit)

Copying and Initializing Settings

Rhythm Key Copy
You can copy rhythm tone settings from another
rhythm set to the specified rhythm tone of the current-
ly-selected rhythm set.
1. Select the rhythm part as the current part.
2. Press [PATCH] to access the rhythm set
select page.
3. Press [UTILITY].
The indicator will light.
4. Press PAGE [<] [>] several times to select
"COPY," and press [ENTER].
5. Select "RHYTHM," and press [ENTER].
The display will show the copy source rhythm set
number, the note (key) of the copy source rhythm
tone, and the note (key) of the copy destination
rhythm tone.
fig.6-35TEXT
Copy source
Copy source
rhythm tone
rhythm set
key
number
6. Use [INC] [DEC] or the [VALUE] dial to speci-
fy the copy source rhythm set number, the
copy source rhythm tone key, and the copy
destination rhythm tone key.
You can use PAGE [<] [>] to move the cursor.
7. Press [ENTER].
The confirmation screen will appear in the display.
If you decide to cancel the operation, press [EXIT].
fig.6-36
8. Press [ENTER] once again.
fig.0-005
The Rhythm Key Copy operation will be carried out,
then the normal display will reappear.
If you wish to save the copied rhythm set, perform the
Rhythm Set Write operation.
"Saving Rhythm Sets You've Created
(Rhythm Set Write)" (p. 98)
Copy destination
rhythm tone
key
6
99