Roland JX-305 Owner's Manual page 112

Chapter 7. Applying Effects to the Sound (Effects)
Radio Tuning (Simulate a Radio
Being Tuned)
This effect simulates the sound of a radio being tuned.
fig.7-27 (#MC fig.4-36)
Radio Detune
Specifies the frequency being tuned.
Range: 0–127
By rotating the [MULTI CTRL 1] knob in real time,
7
you can make the effect appear more real.
Noise Level
[MULTI CTRL 2]
Specifies the volume of the tuning noise.
Range: 0–127
Low Gain
Adjusts the boost or cut of the low frequency range.
Range: -15–+15
High Gain
Adjusts the boost or cut of the high frequency range.
Range: -15–+15
Output
Specifies how the sound will be output.
Range: MONO, STEREO
With a setting of "MONO," the output will be monau-
ral.
Output Level
Specifies the output volume of the Radio Tuning
effect.
Range: 0–127
112
RADIO-TUNG
MULTI CTRL1
Radio-Detune
MULTI CTRL 2
Noise Level
MULTI CTRL3
Output Level
[MULTI CTRL 1]
[MULTI CTRL 3]
Phonograph (Simulates an Old
Record)
This effect mutes the tone and adds disc noise to simu-
late the sound of music played on an old record play-
er.
fig.7-28 (#MC fig.4-37-0)
Disc Type
Determines the type of disc noise.
Available Settings:
LP : 33 RPM record
EP : 45 RPM record
SP : 78 RPM record
D NoiseLevel (Disc Noise Level)
[MULTI CTRL 2]
Specifies the volume of the disc noise.
Range: 0–127
Depth
[MULTI CTRL 1]
Adjusts the tone.
Range: 0–+20
As this value is increased, the high range and low
range will be cut, and the mid range will be empha-
sized.
Output Pan
Specifies the stereo location of the output from the
Phonograph effect.
Range: L64–63R
Output Level
[MULTI CTRL 3]
Specifies the output volume from the Phonograph
effect.
Range: 0–127
PHONOGRAPH
MULTI CTRL1
Depth
MULTI CTRL 2
D Noise Level
MULTI CTRL3
Output Level