Roland JX-305 Owner's Manual page 108

Chapter 7. Applying Effects to the Sound (Effects)
Peak1 Q (Peaking 1Q)
Specifies the width of the frequency range affected by
midrange 1.
Range: 0.5–8.0
As this setting is increased, the affected area will
become narrower.
fig.7-20TEXT (=MC fig.4-29)
Gain
8.0
Peak1 Gain (Peaking 1 Gain)
Adjusts the volume of midrange 1.
Range: -15–+15
Peak2 Freq (Peaking 2 Frequency)
Determines the frequency of midrange 2.
Range: 200–8000 (Hz)
Peak2 Q (Peaking 2Q)
Specifies the width of the frequency range affected by
7
midrange 2.
Range: 0.5–8.0
As this setting is increased, the affected area will
become narrower.
Peak2 Gain (Peaking 2 Gain)
Adjusts the volume of midrange 2.
Range: -15–+15
Output Level
Adjusts the output level from the 4 band EQ.
Range: 0–127
108
0.5
Frequency
[MULTI CTRL 3]
Spectrum (Add Character to the
Sound)
This is a type of filter, which modifies the tonal charac-
ter by boosting or cutting specific frequencies. It is
similar to an equalizer, but when you wish to add
character to the sound, the Spectrum effect will pro-
duce a more distinctive result.
fig.7-21 (#MC fig.4-30)
Low-High (Low-High Gain)
Specifies the volume change at 500Hz and 8000Hz.
Range: -15–+15
Middle (Middle Gain)
Specifies the volume change at 1250Hz.
Range: -15–+15
Width (Bandwidth)
Specifies the width of the bands in which the volume
will be adjusted. (This setting applies to all bands.)
Range: 1–5
Output Pan
Specifies the panning of the sound that is output from
the Spectrum effect.
Range: L64–63R
Output Level
[MULTI CTRL 3]
Specifies the volume that is output from the Spectrum
effect.
Range: 0–127
SPECTRUM
MULTI CTRL1
Low-High Gain
MULTI CTRL 2
Middle Gain
MULTI CTRL3
Output Level
[MULTI CTRL 1]
[MULTI CTRL 2]