Copying Sound Source
Settings (COPY)
This function lets you copy data of any Patch, Performance,
or Rhythm Set into the current Patch, Performance, or
Rhythm Set. Using this function effectively makes editing
easier.
Performance Copy
To copy the settings of a Performance, press [UTIL/CARD]
in Performance mode, then perform Copy operation.
Performance Part Copy
The Part settings of a Performance will be copied to the Part
you specify of the current Performance.
fig.4-08.e
Copy source Performance
(group, number)
Copy source Part
* To specify the currently selected Performance as the copy source,
set Source to TEMP.
* When the Copy operation is executed, an "*" will be displayed
in front of the copy-destination part name.
Performance Effects Copy
The effects settings of a Performance or Patch will be copied
to the current Performance.
fig.4-09.e
Copy source
Press [
] to move to the next display, and then select the
contents of the effect that you wish to copy.
fig.4-10.e
Copy type
ALL:
Multi-effects, chorus, and reverb settings
EFX:
Multi-effects settings
CHORUS: Chorus settings
REVERB:
Reverb settings
CHO&REV: Chorus and reverb settings
Copy source
Performance name
Copy destination Part
Copy source Patch/Performance
(group, number, name)
Chapter 4. Memory Settings (Utility/Card Mode)
Performance Name Copy
The name of a Performance will be copied to the current
Performance.
fig.4-11.e
Copy source Performance (group, number, name)
Patch Copy
When you want to copy Patch settings to the current Patch,
press [UTIL/CARD] in Patch mode and perform Copy
operation.
Patch Tone Copy
Tone settings of a Patch will be copied to the Tone you
specify of the current Patch.
fig.4-12.e
Copy source Patch
(group, number)
* To specify the currently selected Patch as the copy source, set
Source to TEMP.
* When the Copy operation is executed, an "*" will be displayed
in front of the copy-destination tone.
Patch Effects Copy
The effects settings of a Patch or Performance will be copied
to the current Patch.
fig.4-13.e
Copy source
Press [
] to move to the next display, and then select the
contents of the effect that you wish to copy.
fig.4-14.e
Copy type
ALL:
Multi-effects, chorus, and reverb settings
EFX:
Multi-effects settings
CHORUS: Chorus settings
REVERB:
Reverb settings
CHO&REV: Chorus and reverb settings
Copy source Patch name
Copy destination Tone
Copy source Tone
Copy source Patch/Performance
(group, number, name)
117