Roland JX-305 Owner's Manual page 148

Chapter 9. Editing Patterns
Pitch Bend
These MIDI messages change the pitch.
fig.9-59 (#MC fig.10-63)
Range: -8192–+8191
Poly A-Touch (Polyphonic Aftertouch)
These MIDI messages apply aftertouch to individual notes.
fig.9-60 (#MC fig.10-64)
Note
Range:
Note: C-1–G9
Value: 0–127
The display will indicate the note name.
Ch A-Touch (Channel Aftertouch)
These MIDI messages apply aftertouch to an entire
MIDI channel.
fig.9-61 (#MC fig.10-65)
Range: 0–127
* The JX-305's keyboard transmits Channel Aftertouch
messages.
9
Tempo Change
This data controls the tempo. This is used only in the
MUTE CTRL part.
fig.9-62 (#MC fig.10-66)
Range: 20.0–240.0
Mute
This is Mute data for each part and rhythm group. It is
used only in the MUTE CTRL part.
fig.9-63 (#MC fig.10-66-1)
Part, Group
Range:
Part Group: P1–PR, BD, SD, HH, CLP, CYM,
TOM/PC, HIT, OTHERS
Value: OFF, ON
148
Value
Sys Exclusive (System Exclusive)
These are MIDI messages unique to the JX-305. If the
entire message cannot be shown on one line, a " →"
will appear at the right edge of the display.
You can press PAGE [<] [>] to scroll the display
screen. It is used only in the MUTE CTRL part.
fig.9-64 (#MC fig.10-67)
No Event
If there is no MIDI message at the current position, the
following display will appear.
fig.9-65 (#MC fig.10-68)
Modifying the Value of Musical
Data (Change Event)
1. In the Microscope page, rotate the [VALUE]
dial to select the musical data that you
wish to change.
2. Press PAGE [>].
The cursor will appear at the location of the parameter
which can be modified.
fig.9-66 (#MC fig.10-69)
3. Use [INC] [DEC] or the [VALUE] dial to modi-
fy the value.
For messages that have more than one parameter
value that can be modified (such as Notes, Control
Changes, Polyphonic Aftertouch, etc.), use [ENTER] or
PAGE [<] [>] to move the cursor.
fig.9-67 (#MC fig.10-70)
PAGE
4. Press [ENTER] or PAGE [<] [>] to return the
cursor to the position.
UPPER