(Backup Load); Deleting The Backup File From The Card; (Backup Delete); Copying An Entire Card (Card Duplicate) - Roland JX-305 Owner's Manual

Restoring the Saved Settings Back
to Internal Memory (Backup Load)
This operation loads the contents of a backup file that
was saved on a card back into internal memory.
1. Make sure that the memory card is insert-
ed in the memory card slot.
2. Press [UTILITY].
The indicator will light.
3. Press PAGE [<] [>] several times to select
"CARD," and press [ENTER].
4. Press PAGE [<] [>] several times to select
"BACKUP LOAD," and press [ENTER].
The Backup Load page will appear.
fig.12-11 (#MC fig.14-8)
5. Press [ENTER].
The following display will appear, and the Backup
Load operation will be carried out.
fig.0-5 (#MC fig.2-36)
6. When Backup Load is completed, the fol-
lowing display will appear.
fig.12-13 (#MC fig.14-10)
To exit the Backup Load page, press [UTILITY].
Deleting the Backup File from
the Card (Backup Delete)
When you no longer need a backup file that you creat-
ed, you can delete the backup file. By deleting the
backup file, you can increase the capacity of the card
by 120,000 notes.
1. Make sure that a memory card is inserted
into the memory card slot.
2. Press [UTILITY].
The indicator will light.
Chapter 12. Using Memory Cards
3. Press PAGE [<] [>] several times to select
"CARD," and press [ENTER].
4. Press PAGE [<] [>] several times to select
"BACKUP DELETE," and press [ENTER].
The Backup Delete page will appear.
fig.12-14 (#MC fig.14-10-1)
5. Press [ENTER].
The following display will appear, and the Backup
Delete operation will be carried out.
fig.0-5 (#MC fig.14-10-2)
6. When Backup Delete is completed, the fol-
lowing display will appear.
fig.12-16 (#MC fig.14-10-3)
To exit the Backup Delete page, press [UTILITY].
Copying an Entire Card
(Card Duplicate)
This operation copies all data from a memory card to
another memory card, to create an exact duplicate of
the first card. If a card contains important data, it is a
good idea to create a duplicate as a safety measure.
* The Card Duplicate operation can be used only with cards
that are the same capacity. For example, it is not possible
to copy a 2 MB card to a 4 MB card, or vice versa.
1. Prepare a copy source memory card and
an empty memory card of the same capac-
ity.
The copy destination card must already be formatted.
2. While holding down [UTILITY], press the
[POWER] button to turn on the power.
The following display will appear.
12
161