Rear Panel; Phones Jack; Power Switch - Roland JX-305 Owner's Manual

1
MEMORY
CARD
S2M-5/S4M-5

Rear panel

1 MEMORY CARD Slot
An optional memory card (SmartMedia) can be inserted here (p. 159).
2 MIDI IN/OUT/THRU Connectors
External MIDI devices can be connected here (p. 171). Use MIDI cables (sold separately) to
make connections.
3 SWITCH PEDAL Jack
A separately sold pedal switch or foot switch can be connected here. The pedal can be operat-
ed to apply various effects (p. 46).
4 CONTROL PEDAL Jack
The expression pedal (EV-5; sold separately) can be connected here. The pedal can be operat-
ed to adjust the volume or to make the sound change in various ways (p. 23).
5 HOLD PEDAL Jack
A separately sold pedal switch can be connected here. The pedal can be used to sustain notes
(p. 23).
6 OUTPUT Jacks (L (MONO), R)
An amp or mixer can be connected to these jacks. If outputting in mono, make connections to
the L jack (Quick Start, p. 3).

7 PHONES Jack

Accepts connection of headphones. Audio signals will still be output from the output jacks
even if headphones are connected (Quick Start, p. 3).
8 DC IN Jack
Connect the included AC adapter here (Quick Start, p. 3).

9 POWER Switch

This switch turns the power on/off (Quick Start, p. 5).
12
2 3 4 5
MIDI PEDAL
THRU OUT IN SWITCH CONTROL
8
6 7
DC IN 9V
450mA
OUTPUT
HOLD R L(MONO) PHONES
USE ROLAND
ACI,ACB
ADAPTOR ONLY
9
POWER