Saving Patterns You've Modified (Pattern Write) - Roland JX-305 Owner's Manual

Chapter 3. Playing Patterns
Level settings of the selected rhythm set
(rhythm part only) (p. 97).
ON : Multi-effects will be applied.
"Applying Various Effects to the Sound
(Multi-Effects)" (p. 106)
Specifying the output destination for
musical data
(Sequencer Output Assign)
You can specify the output destination for the musical
data of each part. For example, if you wish to use the
JX-305 together with a sampler such as the SP-202, you
can set Sequencer Output Assign to "EXT" for one or
more of the parts. This will allow playback data from
3
the JX-305 sequencer to control the external MIDI
device.
If you want to control an external MIDI device
such as a sampler...
"Controlling an External MIDI Device from
the JX-305" (p. 174)
fig.3-32 (#MC fig.2-31&fig.2-32)
JX-305
Part 1 SEQ Out Assign = INT
Part 2 SEQ Out Assign = INT
Part 3 SEQ Out Assign = INT
Part 4 SEQ Out Assign = INT
Part 5 SEQ Out Assign = INT
Part 6 SEQ Out Assign = INT
Part 7 SEQ Out Assign = INT
Part R SEQ Out Assign =EXT
Range:
INT : Musical data from the sequencer will be
sent to the internal sound generator of the
JX-305.
EXT : Musical data from the sequencer will be
sent to an external device via MIDI OUT.
BOTH : Musical data from the sequencer will be
sent both to the internal sound generator
and from MIDI OUT.
* If "EXT" or "BOTH" is selected, that part will not be
heard even if you play back the pattern.
36
Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7
Part R
MIDI OUT
SP-202
Musical data from parts that are set to EXT will be
transmitted as MIDI messages from MIDI OUT on a
different MIDI channel for each part.
The musical data of each part is transmitted on the fol-
lowing MIDI channels.
Part 1 2 3
Channel 1 2 3
If you wish to use the keyboard to directly play an
external MIDI device, set the Local Switch to "EXT."
"Disconnecting the Keyboard from the
Internal Sound Generator (Local Switch)" (p.
165)
Saving Patterns You've
Modified (Pattern Write)
If you have modified the patch and part mixer settings
for each part to create a pattern that you wish to keep,
you can save that pattern as a User Pattern.
1. Make sure that the pattern is stopped.
2. Press [PTN/SONG] to access the pattern
select page.
3. Hold down [SHIFT] and press [WRITE].
The indicator will blink.
The following display will appear, and "
sor) will appear at the left of the number.
fig.3-33
SHIFT
UTILITY
WRITE
If you do not wish to change the number or name, you
can skip steps 4–8.
If you decide not to save the pattern, press [EXIT].
4. Press [PRESET/USER/CARD] to select the
save destination group.
* The PRESET group and TMP annot be selected.
* CARD groups can be selected only if an optional memory
card is inserted.
"Using Memory Cards" (p. 159)
5. Use [INC] [DEC] or the [VALUE] dial to select
the save destination bank and number.
You can also use the BANK and NUMBER [1]–[8] but-
tons to select the save destination bank and number.
4 5 6 7 R
4 5 6 7 10
" (the cur-