Inserting A Pattern (Insert Pattern); Saving A Song That You Recorded (Song Write) - Roland JX-305 Owner's Manual

5. Press [ENTER].
The confirmation screen will appear in the display.
fig.11-13 (#MC fig.13-7)
6. Press [ENTER] once again.
The Delete Pattern operation will be carried out, and
the normal display will reappear.

Inserting a Pattern (Insert Pattern)

This operation insert a pattern into the specified loca-
tion of a song. Use this when you want to add addi-
tional patterns to the song.
* A maximum of 50 patterns can be recorded in a song. If
the song already contains 50 patterns, no more patterns
can be inserted.
fig.11-14TEXT (#MC fig.13-8)
C:A11
Insert
P:A12U:A12 C:A17
SONG U:11
1. Select the song into which you wish to
insert a pattern.
2. Press [EDIT].
The indicator will light, and the display will show the
edit page.
3. Press NUMBER [3] (INSERT).
The Insert Pattern setting page will appear, and the
display will indicate the pattern playback number and
the corresponding pattern.
fig.11-15 (#MC fig.13-9)
EDIT
3
FX ON/OFF
INSERT
4. Specify the location (pattern playback number)
at which the pattern will be inserted.
Range: 1–50, END
With a setting of END, the pattern will be added to the
end of the song.
5. Press [ENTER].
The cursor will move to the right.
fig.11-16 (#MC fig.13-10)
Chapter 11. Connecting Patterns in Playback Order to Create a Song
P:A12 U:A12 C:A11 C:A17
HH
6. Select the pattern that will be inserted.
Range: P:A11–P:L88, U:A11–U:D18, C:A11–C:D18
* You can press [PRESET/USER/CARD] and [<PREV]
[NEXT>] to switch groups.
7. Press [ENTER].
The confirmation screen will appear in the display.
fig.11-17 (#MC fig.13-11)
8. Press [ENTER] once again.
The Insert Pattern operation will be carried out, and
the normal display will reappear.
Saving a Song That You
Recorded (Song Write)
If you are happy with the song that you recorded, you
can save that song as a user song.
1. Make sure that the song is stopped.
2. Press [PTN/SONG] to access the song select page.
If you modify song settings, an "*" (asterisk) will
appear at the left of the number, indicating that the
selected song has been modified (edited). Be aware
that if you turn off the power without saving the mod-
ified song, the previous settings will reappear.
3. Hold down [SHIFT] and press [WRITE].
The indicator will blink.
The following display will appear, and a "
will appear at the left of the number.
fig.11-18
SHIFT
UTILITY
WRITE
If you do not wish to modify the number or name, you
can skip steps 4–7.
If you decide not to save the song, press [EXIT].
4. Use [INC] [DEC] or the [VALUE] dial to select
the save destination bank and number.
At this time, you can press [UNDO/REDO] to check
the name of the song that is currently in the save desti-
nation number. After you have found a song that you
do not mind overwriting, press [UNDO/REDO] once
again to return to the previous display.
" (cursor)
11
157