Roland JX-305 Owner's Manual page 66

Chapter 5. Creating Original Sounds (Patch Edit)
Reso Velo (Resonance Velocity
Sensitivity)
Specifies how resonance depth will be affected by
your playing dynamics on the keyboard.
Range: -100–+150
With positive (+) settings, playing the keyboard more
strongly will cause the change to be greater. With neg-
ative (-) settings, playing the keyboard more strongly
will cause the change to be less.
Env Depth (Filter Envelope Depth)
This is the setting page for "Specifying the depth of
the envelope (Filter Envelope Depth)" (p. 64).
Velo Curve (Filter Envelope Velocity
Curve)
Select the curve of change with which the force of your
playing on the keyboard will affect the amount of
change produced by the filter envelope.
Range: 1–7
5
fig.5-37 (=MC fig.3-36)
1 2 3
Velo Sens (Filter Envelope Velocity
Sensitivity)
Specifies how the force of your playing on the key-
board will affect the filter envelope.
Range: -100–+150
With positive (+) settings, the tone will change more
as you play more strongly on the keyboard. With neg-
ative (-) settings, the tone will change less as you play
more strongly on the keyboard.
If you wish to change the loudness of notes
played on the keyboard...
"Changing the Loudness of Notes Played on
the Keyboard (Keyboard Velocity)" (p. 163)
With positive (+) settings of Velocity Sensitivity, the
sound will be brighter for strongly-played notes, and
darker for softly-played notes.
The four front panel knobs [ATTACK] / [DECAY] /
[SUSTAIN] / [RELEASE] can be used to set the most
commonly-used parameters of the filter envelope, but
the JX-305 also allows you to make more detailed filter
envelope settings.
fig.5-38TEXT (=MC fig.3-37)
66
4 5 6 7
Cutoff
frequency
+
Time1(A) Time2 Time3(D)
0
Level1 Level2
Key on
Time1–4 (Filter Envelope Time 1–4)
Specifies the time until the next cutoff frequency is
reached. You can set the four values Time1–4.
Range: 0–127
Higher settings will lengthen the time until the next
cutoff frequency is reached.
* The front panel [ATTACK] (Attack Time) corresponds to
Time1, [DECAY] (Decay Time) to Time3, and
[RELEASE] (Release Time) to Time4.
Level1–4 (Filter Envelope Level 1–4)
Specifies the cutoff frequency at each level. You can set
the four values Level1–4.
Range: 0–127
Higher settings will also raise the cutoff frequency.
* The front panel [SUSTAIN] (Sustain Level) corresponds
to Level3.
Velo Time1 (Filter Envelope Velocity
Time 1 Sensitivity)
Specifies how the dynamics of your playing on the
keyboard will affect Time1.
Range: -100–+100
With positive (+) settings, Time1 will become faster as
you play the keyboard more strongly. With negative (-)
settings, Time1 will become slower as you play the
keyboard more strongly.
Velo Time4 (Filter Envelope Velocity
Time 4 Sensitivity)
Specifies how the speed at which you release the key-
board will affect Time 4.
Range: -100–+100
With positive (+) settings, Time4 will become faster as
you release the keyboard more quickly. With negative
(-) settings, Time4 will become slower as you release
the keyboard more quickly.
Time4(R)
Time
Level3(S) Level4
Key off