Transporting The Boiler On Rollers - Buderus Logano plus GB312 Installation And Maintenance Instructions Manual

Transporting the boiler using pipes
WARNING: Risk of injury through incorrect
lifting and carrying!
B Lifting and carrying the boiler requires at
least 4 persons.
B Only lift the boilers at the points provided.
B Secure the boiler against slippage.
B Slide the pipes through the holes in the front of the
boiler.
B Secure pipes against slippage at the points shown in
Fig. 5 [1], e.g. with adhesive tape.
B Carry the boiler to the installation location.
Fig. 5 Transporting the boiler using pipes
1 Points to secure the boiler against slippage
2 Pipe
Logano plus GB312 - Subject to technical modifications.
Transporting the boiler
4.3

Transporting the boiler on rollers

If the path to the installation location is level, the boiler can
also be rolled. For this, use at least 5 pipes of approx.
700 mm length (R 1¼ " diameter) as rolling supports.
B Position the pipes approx. 400 mm apart on the floor.
B Lift the boiler onto the pipe sections and carefully
transport it to the installation location.
Commercially available transport rollers can
be used.
B Ensure even load distribution on the load-
bearing parts to prevent distortion of the
bottom plate.
~ 7 0 0
~ 4 0 0
Fig. 6 Transporting the boiler on rollers
(measurements in mm)
4
17