Inspection/Maintenance; Tools, Materials And Auxiliary Equipment; 3.10 Validity Of Regulations - Buderus Logano plus GB312 Installation And Maintenance Instructions Manual

3.8

Inspection/maintenance

Heating systems should be regularly serviced for the
following reasons:
• to achieve a high level of efficiency and to operate the
heating system economically
• to achieve a high level of operational reliability
• to maintain the cleanest possible combustion
Maintenance interval
NOTICE: Boiler damage through a lack of, or
unsatisfactory, cleaning and maintenance!
B Inspect the heating system annually and
clean if required.
B Carry out maintenance as required. To
prevent damage to the heating system,
remedy all faults immediately.
3.9 Tools, materials and auxiliary
equipment
For boiler installation and maintenance, the tools generally
required by heating system installers and those dealing
with gas and water installations are required.
In addition, the following is appropriate:
• 2 pipes (approx. R 1¼ , approx. 2 m long) for carrying
or
5 pipes (approx. R 1¼ , 0.7 m long) as supports for
rolling the boiler.

3.10 Validity of regulations

Modified regulations or supplements are also valid at the
time of installation and must be observed.
Logano plus GB312 - Subject to technical modifications.
3
Regulations
15