Transporting The Boiler; Checking The Delivery For Completeness; Lifting And Handling The Boiler - Buderus Logano plus GB312 Installation And Maintenance Instructions Manual

4

Transporting the boiler

4 Transporting the boiler
This chapter details how to safely transport the boiler.
NOTICE: Boiler damage through impact!
The standard delivery of the boiler includes
components that are susceptible to impact
damage.
B Protect all components against impact
influences when transporting the boiler.
B Observe the transport markings on the
packaging.
NOTICE: Boiler damage through
contamination!
If the boiler is not to be taken into use after
unpacking:
B Protect the boiler against contamination
by leaving the protective caps fitted to the
connections.
4.1 Checking the delivery for
completeness
B After delivery, check all packaging is in perfect
condition.
B Check the delivery for completeness (
Tab. 4, page 6).
B Dispose of packaging in an environmentally
responsible manner.
4.2

Lifting and handling the boiler

After removing the front and side panels, the boiler can be
carried with 2 pipes (R 1¼ , approx. 2 m long) to the
installation location.
Removing the front and side panels
B Remove locking screw [3] from the top of the front
panel at the centre of the boiler.
B Slightly lift front panel [1] and remove towards the
front.
B Remove locking screws [3] from the side panels at the
front and back of the boiler.
16
B Slightly lift side panels [2] and remove.
Fig. 3
1 Front panel
Tab. 3 and 2 Side panel
3 Locking screws
Lifting the boiler from its pallet
B To lift the boiler from its pallet [2], first remove locking
screws [1] at the bottom of the boiler.
Fig. 4
1 Locking screws
2 Pallet
Logano plus GB312 - Subject to technical modifications.
Removing the front and side panels
Lifting the boiler from its pallet