Mitsubishi 1989-1993 GALANT Service Manual page 61

ENGINE <SOHC> - Servioe Adjustment Procedures
Access
cover
0 0
Access cover
Screwdriver slot
(9) Remove the air conditioning drive belt and the generator
drive belt.
0
inserting a screwdriver into the slots indicated by the raised
arrows in the timing belt cover and twisting.
access hole and loosen the tension spacer (with a tensioner
lock nut on it) 1 to 2 turn.
Next insert a 14 mm socket wrench from the slot side
access hole and loosen the tensioner lock bolt 1 to 2 turn.
01 II0221
sprocket.
the lo&er side), and then tighten the tensioner spacer
(upper side).
Caution
Be sure to tighten the bolt (lower side) first. lf the
tensioner spacer of pivot side is tightened first, the
tensioner will rotate with it and belt tension may
sliding it in.
belt and adjust the slack. (Refer to P.l l-l 2.)
TSB Revision