FUEL SYSTEM <SOHC-8 VALVE> - Fuel Tank
a
.
a
a
a
Positioning projection
(8)
the fuel
Remove
pump installation
holding the fuel pump (at the lower side of the fuel tank),
and then remove the fuel pump from the fuel tank.
(9) Align the three positioning projections of the packing with
the holes in the fuel pump.
(lO)When the fuel pump is installed, the holding bolt at the
lower side of the fuel tank should be installed first.
Care should be taken at this time that the O-ring is not
pinched.
operation of the ACTIVE-E.C.S. after installation of the rear
height sensor. (Refer to GROUP 33B-Service Adjustment
screws and the bolt for