Samsung OfficeServ 7100 Technical Manual page 68

OfficeServ 7100
TECHNICAL MANUAL
MMC: 126
DESCRIPTION:
This MMC is used to configure any MOBEX ports that have a Master Station assigned.
This is a user programmable MMC that allows the user to set dial strings and other
options relating to their MOBEX ports.
NOTE: This MMC is password protected with the station passcode from MMC 101.
This password protection is bypassed by logging in to technician level programming
through MMC 800
MBR 1 ~ 5: This is a read only selection that allows you to choose which MOBEX
port to configure options for. If there are no MOBEX ports with this
station set as MASTER in MMC 328 this MMC will display NOT
PERMIT after the station passcode is entered.
TEL: This option sets the number to dial when this MOBEX port is
accessed. You must include a trunk group in the dial string.
CLI: This option sets the CLI to associate with this MOBEX port. This
option only has an affect if the MOBEX port is set as an Executive user
in MMC 328. When set the system will automatically log this user into
the MOBEX feature when dialling in to the system on a DID that rings
to a destination of the MOBEX feature code (set in MMC 724) in MMC
714.
DEACT: This option determines if the MOBEX port is active (DEACT:NO) or
inactive (DEACT:YES). A MOBEX port that is in an inactive state
cannot be dialled directly and users attempting to do so will receive
an INVALID NUMBER error.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
[Available Only with v.4.30 or Higher]
Home Page
PROGRAMMING
PART 2 MAY 2009
MOBEX NUMBER
Table of Contents