Samsung OfficeServ 7100 Technical Manual page 212

OfficeServ 7100
TECHNICAL MANUAL
MMC: 510
DESCRIPTION:
Provides the ability to customize the receiving ring cadence for single line ports on a
system-wide basis. There are 5 cadences available. Please call Technical Support
before changing any cadences as some peripheral systems may require default
settings.
CADENCE NAME
1:STN RING
2:TRK RING
3:DOOR RING
4:ALM RING
5:CBK RING
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 510.
Display shows.
2. Dial cadence number from above list (e.g., 3)
OR
Press UP or DOWN key to select , press
LEFT soft key and advance to step 3.
DESCRIPTION
This is the cadence incoming intercom calls will ring at.
This is the cadence incoming trunk calls will ring at.
This is the cadence incoming doorphone calls will ring at.
This is the cadence incoming alarm reminder calls will ring at.
This is the cadence callbacks will ring at.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Home Page
PART 2 APRIL 2007
SLI RING CADENCE
DISPLAY
1:STN RING :0400
0200 0400 3000
3:DOOR RING:0400
0100 0400 2000
Table of Contents
PROGRAMMING