Samsung OfficeServ 7100 Technical Manual page 404

OfficeServ 7100
TECHNICAL MANUAL
MMC: 825
DESCRIPTION:
When you have networked switches, this MMC is used to set the network related
options for Caller ID and Voice Mail.
These are the options:
0 ADD NUMBER TO NAME
1 USE REMOTE VM
2 REMOTE VM NUMBER
3 REMOTE CID NUMB
4 USE REMOTE ATTN
5 REMOTE ATTN NUMB
6 SPNET SEND DIGITS
PROGRAM KEYS
VOLUME
KEYPAD
SOFT KEYS
SPEAKER
HOLD
NETWORK OPTIONS
Assign to include the extension number in the
name field of Q-SIG standard message.
Assign to use SVM on remote system.
Assign to access number of remote SVMi when
Remote VM is used.
Assign to use delete node number when CID
number send to SVMi.
Assign to use Attendant on remote system.
Assign to access number of remote attendant
when the remote attendant is used (one access
number per ring plan).
When IP networking systems, this option
determines the method used for sending digits
between nodes.
MGI Signalling: follows the "DTMF TYPE"
•
setting in MMC 835 (inband or out of band)
for signaling between nodes.
MCP Signalling: MCP sends IPC messages
•
to MCPs in other network nodes over IP with
digit information. MGI is not involved. This
does not apply to analog devices sending
digits across the network (i.e. SLT)
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to advance to the next MMC
Used to clear previous entry
Table of Contents
Home Page
PROGRAMMING
PART 2 APRIL 2007