Samsung 7100 Quick Start Manual

Attach the TV to Connect video
the Stand devices
Step Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1A
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
1E
1F

QUICK START

GUIDE
BN68-05280A-03
Power on and
Using the Smart
start the initial
Touch Control
setup
Step Step
2 3
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Insert the stands into the grooves on both
sides on the bottom of the TV's back.
Place the stand covers on the stands and press
them until they click in place.
Put up the TV with assistance from a person
after attaching the stands to the TV.
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Smart Touch Control
4
Batteries (AAA x 2)
Also included: User manual, regulatory guide, 3D Active Glasses
1B
x 2
Leg
1D
To detach the stand covers from the TV, use a flat screwdriver.
Insert a flat screwdriver into the gap at the bottom of the stand covers, and pull it up until
they separate.
[ Be careful not to scratch the stand with the screwdriver.
Stand Parts and Cables
Power cord
x 4
Wall mount adapter
x 2
Cable manager
Find the stand leg and screws in the box and
set aside.
x 4
Screws
Insert 4 screws and secure the stand to the TV.
x4 (M4 X L12)
IR extender
x 2
Stand Cover