Samsung OfficeServ 7100 Technical Manual page 393

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

This MMC is used to assign the system link ID for QSIG and IP networking. In the

case of IP networking this MMC is also used to set the IP address and other settings

related to the various network links, or "nodes".

This is the unique system identifier associated with a network

This field is the IP address used to connect to the network node.

This option allows the OfficeServ 7100 to sync the internal clock to

an IP network node.

This field determines if an IP network node is PUBLIC or PRIVATE

in relation to the OfficeServ 7100. PRIVATE references a device

that is on the same subnet, PUBLIC references a device on a

different subnet.

NODE NAME This field sets a name to associate with a network node. This field

is mainly for technician reference and is not used elsewhere in the

This option determines is communications with this IP network

node should use MPS channels or MGI channels. The default

setting of OFF means that only MGI channels will be used. ON

means that MPS channels will be used.

NOTE: This option is only displayed if the MPS SERVICE is

ENABLED in MMC 861.

This field determines the audio codec to use when communicating

with an IP network node. The default setting is G729a. Available

alternatives are G711u-law and G711a-law.

PROGRAM KEYS

Used to scroll through options

Used to enter selections

Used to store data and advance to next MMC

Used to delete an entry

ASSIGN SYSTEM LINK ID

Table of Contents

PART 2 MAY 2009