Samsung OfficeServ 7100 Technical Manual page 430

OfficeServ 7100
TECHNICAL MANUAL
TOS/DiffSrv:
802.1 p/q:
802.1 P:
802.1 VLAN:
G711 FRAME:
G729 FRAME:
G729a FRAME:
G723 FRAME:
NOTE: The settings in this MMC to do not affect ITP to ITP calls where both
keysets are on the same subnet. For these types of calls an MGI
channel is not used, so settings in MMC 840 and MMC 841 take effect.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER Used to store data and advance to next MMC
ACTION
1. Press TRANSFER 835.
Display shows the first option.
2. Press RIGHT soft key to move cursor.
OR
Press UP or DOWN key to select a parameter.
3. Press RIGHT soft key to move cursor.
MMC: 835
An eight-bit binary value that will be utilized by external
routers, switches, etc (that optionally support TOS-bit/DiffServ
prioritization) – to identify the transport-priority value of data
packets generated by the MGI card. This value can be left at
default value (00000000) if your network infrastructure does
not support this method of bandwidth management
Enables/disables VLAN tagging on the MGI resources
Assigns a priority to the VLAN tag
Assigns a VLAN ID to the MGI
Determines the frame length for the G.711 codec. Default is
20 milliseconds. Range is 10 ms ~ 60 msec.
Determines the frame length for the G.729 codec. Default is
20 milliseconds. Valid values are 20, 40, and 60 msec.
Determines the frame length for the G.729a codec. Default is
20 milliseconds. Valid values are 20, 40, and 60 msec.
Determines the frame length for the G.729 codec. Default is
30 milliseconds. Valid values are 30 and 60 msec.
Used to scroll through options
Used to enter selections
Move cursor left and right
Home Page
PROGRAMMING
PART 2 MAY 2009
DISPLAY
MGI6:AUDIO CODEC
G.729A
MGI6:AUDIO CODEC
G.729A
MGI6:AUDIO CODEC
G.729A
Table of Contents