Samsung OfficeServ 7100 Technical Manual page 411

OfficeServ 7100
TECHNICAL MANUAL
Public IP Only – use when MP10/MP10a IP address is exposed to the public
network.
• SYSTEM PUBLIC IP: The MP10/MP10a will originate communications, to
ITP/VOIP devices outside the local network, using this IP address.
Communications to/from this IP will require involvement of the MGI resources.
The system identifies communications to/from this address as "public". This
allows devices, on remote networks/subnets, to establish communications with
the system, without exposing your LAN.
• SYSTEM MAC ADDR: For your reference, and cannot be changed. The unique
hardware (MAC) address of the MP10/MP10a card.
• SYSTEM IP VERS: No entry required. Reserved for future use.
CTI SERVER ADDRESS: This entry determines the IP address of the server
•
running the OfficeServ Link application. If set, only this IP address is allowed to
connect to the OfficeServ 7100. The default setting of 0.0.0.0 allows the OS Link
server to connect regardless of the IP address.
NEWS ADDRESS: Not for use in the USA
•
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 830.
Display shows the system IP address.
2. Press RIGHT soft key to move cursor on IP
address line.
3. Using the keypad enter three digit IP octet
numbers IE 192 168 001 010 for 192.168.1.10
4. Cursor will return to Step 1 upon completion
of IP address entry.
5. Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
MMC: 830
See "SYSTEM IP TYPE."
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Home Page
PROGRAMMING
PART 2 MAY 2009
DISPLAY
SYSTEM IP ADDR
192.168.9.209
SYSTEM IP ADDR
192.168.9.209
SYSTEM IP ADDR
192.168.001.010
SYSTEM IP ADDR
192.168. 1. 10
SYSTEM GATEWAY
192.168. 9. 2
Table of Contents