Samsung OfficeServ 7100 Technical Manual page 502

OfficeServ 7100
TECHNICAL MANUAL
MMC: 861
DESCRIPTION:
Assigns several options (listed below) on a system wide basis.
OPTIONS
0 AUTO UPDATE TIME
1 SYSTEM SPEED BIN
2 IDLE WHEN ENBLOCK
3 2 LINE ENBLOCK
LP TRK TONE DISC
SPNET OVERLAP
[Applies to v.4.22 or Lower]
When this option is set to ENABLE The system
will synchronize the system time and date
setting to the data received on an ISDN call
connect message. If a system has multiple PRI
cards the PRIORITY 1 setting in MMC 826 will
determine the card used.
When this option is set to 500. The system will
have a maximum of 500 system speed dial
bins numbered 500 to 999. When set to 950
the system will have a maximum of 950 system
speed dial bins numbered 050 to 999. Station
speed dial bins will be 000 to 049.
Note: Personal speed dial number changes
from 2 digits to 3 digits when 950 is selected.
When this option is enabled the ITP-5121D
keyset will receive incoming calls when dialing
out before the SEND button is pressed. When
disabled an incoming call will appear as a call
waiting call if idle CALL key is available.
Note: This option has no effect if #3 below is
disabled.
When this option is enabled the ITP-5121D
keyset can dial a telephone then press the
SEND button to place the call. This operates
like a cell phone. When disabled the ITP-
5121D sends each digit as you dial it.
NOT USED IN USA
NOT USED IN USA
Home Page
PART 2 JANUARY 2009
SYSTEM OPTION
Table of Contents
PROGRAMMING