Samsung OfficeServ 7100 Technical Manual page 479

OfficeServ 7100
TECHNICAL MANUAL
ALM ALM
NO. CODE
64 MNF04
65 MNF05
66 MNF06
67 MNF07
68 MNF08
69 MNF09
70 MNF10
71 MNF11
72 MNF12
73 MNF13
74 MNF14
75 MNF15
76 MNF 16
77 MNF 17
78 MNF 18
MMC: 852
ALARM
Trunk Fault
Trunk Recovery
Trunk Disconnect
Trunk Connect
SIO TXQ Over
SIO TXQ Under
T1 Out of Service
T1 In Service
SIO Out
SIO In
TODC Error
TSW Over Alarm
PSU Alarm
PSU Alarm Rec
SLI Fault
Home Page
PROGRAMMING
PART 2 APRIL 2007
DEFINITION
Out of service trunk detected via loop
detect. Internal CODEC test.
Alarm Data = Cabinet-Slot Port (C1,2)-
(S1 through 10), (P1 through 16)
Out of service trunk detected via loop
detected as out of service is now
operational.
Alarm Data = Cabinet-Slot Port (C1,2)-
(S1 through 10), (P1 through 16)
Out of service trunk detected via seizure
of trunk. External seizure test.
Alarm Data = Cabinet, Slot Port (C1,2)-
(S1 through 10), (P1 through 16)
Out of service trunk recovered via
seizure of trunk External seizure test.
Alarm Data = Cabinet, Slot Port (C1,2)-
(S1 through 10), (P1 through 16)
SMDR buffer above 80% capacity.
SMDR buffer below 80% capacity.
A digital line is out of service
Digital line has been restored to normal
service.
Alarm Data = Cabinet,Slot (C1-2,S1
through 10)
IO port has lost DTR
Alarm Data = SIO 1 through 6
IO port has regained DTR.
Alarm Data = SIO 1 through 6
Time of Day Clock in the MCP has
erred.
TSW has been requested to exceed the
capacity of available time slots.
Maximum 192 per cabinet.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Indicates there are over 96 ports in a
cabinet with a single DPCU and more
power is required. ( DLI,SLI ports)
Alarm Data = Cabinet (1,2)
A second DPCU has been recognized
when added after alarm condition of
Alarm Data = Cabinet (1,2)
An SLI card has been detected as out of
service via an internal CODEC test.
Alarm Data = Cabinet, Slot Port (C1,2)
(S1 through 10)
(P1 through 24)
Table of Contents