Samsung OfficeServ 7100 Technical Manual page 498

OfficeServ 7100
TECHNICAL MANUAL
1 SPNET CLI TABLE
E-LCR CLI TABLE
MAX CHAIN FWDALL
PINGRING SERVICE
2 MOBEX EXEC OPTN
MMC: 861
This option determines which CLI table (1
through 4) from MMC 321 will be used when
making outgoing SPNET calls. When set to
NONE the keyset station number will be sent.
This option determines which CLI table (1
through 4) from MMC 321 will be used when
making outgoing E-LCR calls. When set to
NONE the default CLI table for the trunk will be
sent.
This option sets the maximum number of times
a call may be forwarded in a chain forwarding
scenario. The available options are 1 through 5.
This option determines if Pickup Groups set in
MMC 302 will use the Ping Ring service. When
set to ENABLE Pickup Group members will
receive a short burst of ring tone when calls
are made to another member of the Pickup
Group. When set to DISABLE Ping Ringing will
not occur.
This is a sub menu that contains various
system wide options
Executive MOBEX feature.
AUTH BY CLI
This option determines how Executive MOBEX
users log in when calling the system. A setting
of ON will automatically log users in when the
system receives Caller ID that matches a
preset entry. A setting of OFF will require users
to log in manually by entering their extension
and password.
AUTH TONE
This option sets whether callers will hear dial
tone or a specific authorization tone when
dialling in to the Executive MOBEX number.
ON will play the tone specified in the next entry,
TONE SOURCE. The OFF setting will play
normal dial tone.
Table of Contents
Home Page
PROGRAMMING
PART 2 MAY 2009
pertaining to the