Samsung OfficeServ 7100 Technical Manual page 505

OfficeServ 7100
TECHNICAL MANUAL
MMC: 863
DESCRIPTION:
This MMC is the program that specifies the system information of SPNet (Samsung
Proprietary Networking). It is useful when many systems are connected through
SPNet and interlocked with LCR. There are a maximum of 2000 entries.
Option
0 ACCESS NUM
1 IP ADDR
2 TEL NUMBER
3 MAX COUNT
Note: SPNet is VoIP network function developed by Samsung and it is not standard
function.
Conditions:
LINK ID should not be inputed in MMC 820 SYSTEM LINK ID and ACCESS
NUMBER & TELEPHONE NUMBER should be input in the LCR table.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 863.
Display shows.
2. Enter the node entry number
OR
Press VOLUME button to select and press
Right soft button to move cursor.
3. Enter the option number
OR
Description
Other system's ID
Other system's ID address
Rerouting Trunk Number (excluding VoIP Trunk
Number). If SPNet function is not working, call is
rerouted through this trunk.
If you dial a valid digit string until Max Count number,
the system set up call.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Home Page
PROGRAMMING
PART 2 JANUARY 2009
ACCESS NUMBER
DISPLAY
[0001] ACCESS NUM
[0001] ACCESS NUM
[0001] ACCESS NUM
Table of Contents