Samsung OfficeServ 7100 Technical Manual page 101

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

This MMC is designed to enhance the Wake Up feature. The system will play a

recorded Prompt when a Wake Up call is answered by the user. The Wake Up

Announcement feature will require that the embedded voicemail access the

customized Wake Up Prompt (001-9999) that has been recorded on the embedded

voicemail as a Prompt. The end user will record this Prompt and have the ability to

change it when desired using the TUI System Administrator or GUI Voice Studio. The

Wake Up PMT will have no default Prompt assigned to it.

This feature offers a busy overflow destination. In the event that the AA group is busy,

the guest would receive MOH upon answering the wake up call.

This MMC has three options:

AA GROUP (STATION GROUP)

MESSAGE NO (PROMPT NO.)

* Message #5049~5064 have pre-recorded Auto Attendant (AA) default messages

programmed and can be over-written. Do not use this range of messages for

Wake-Up messages if you want to preserve the AA messages.

AUDIO PROMPT

Determines which station group will be

connected when a Wake Up call is

answered. This destination must be any

station group assigned as "VMSUCD".

Determines which message will be played

when a Wake Up call is answered. This

destination can be a custom recorded

message. (Message #1000~9999)*

Determines which tone source will be

connected when AA group members are

all busy. This destination can be a NONE,

TONE or extern music on hold.

If NONE is set then dial tone is connected,

if TONE is set then hold tone is connected.

NOT USED IN USA.

Table of Contents

PART 2 MAY 2009