Samsung OfficeServ 7100 Technical Manual page 293

OfficeServ 7100
TECHNICAL MANUAL
MMC: 720
DESCRIPTION:
Provides a tool for duplicating key assignment from one keyset to another. This can
be done on a per-station basis or on all stations, but not on a group of stations. One
limitation is that the original and target keysets must be of the same type (i.e. same
number of buttons).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Moves cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 720.
Display shows.
2. Enter the station number to copy to (e.g.,
205)
OR
Press UP or DOWN keys to make selection
and press RIGHT soft key to move cursor.
3. Enter station number to copy from (e.g., 203)
and cursor returns to step 2
OR
Press UP or DOWN keys to make selection.
4. Press RIGHT soft key to return to step 2
OR
Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
COPY KEY PROGRAMMING
DISPLAY
[201]
FROM:NONE
[205]
FROM:NONE
[205]
FROM:203
Table of Contents
Home Page
PROGRAMMING
PART 2 APRIL 2007
COPY KEY
COPY KEY
COPY KEY