Samsung OfficeServ 7100 Technical Manual page 329

OfficeServ 7100
TECHNICAL MANUAL
2. BSY FWD CALL
3. NOA FWD CALL
4. RECALL
5. DIR TRK CALL
6. OVERFLOW
7. DID CALL
8. MESSAGE CALL
PROGRESS TONES
These are the DTMF codes that is sent to the VMAA port in place of regular
progress tones. For example, when a VMAA port goes off hook to originate or
transfer a call, instead of hearing normal dial tone, it will hear DTMF " BA " .
Progress tones can greatly increase the efficiency of a VMAA system because it is
easier and quicker to detect DTMF than a busy, ringback or DND tone.
Progress tones can identify any of the following.
TONES
0. DIAL TONE
1. BUSY TONE
2. RNGBACK TONE
3. DND NO MORE
4. HDSET ANSWER
5. SPKER ANSWER
MMC: 726
This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
BUSY set.
This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
NO ANSWER set.
A call is recalling the VM/AA port after being
transferred and not answered.
A C.O. call has gone directly to VM/AA (e.g., trunk
717 DIL to VM/AA).
A call has OVERFLOWED to the VM/AA port from
a station group.
A DID call has called the VM/AA port.
A message button or message reply feature code
has been used to call the VM/AA port.
VALUE
BA
4
5
6
3
2
Table of Contents
Home Page
PROGRAMMING
PART 2 APRIL 2007