GARO Wxxxx (x represents a number)
Other Messages
Other Messages
GARO Wxxxx (x represents a number) ........................................................................................................ 642
ERROR Exxx-xxxx (x represents a letter or number) ................................................................................... 642
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ............................................................... 642
Top cover is open. ....................................................................................................................................... 642
Prepare for parts replacement. .................................................................................................................... 643
Parts replacement time has passed. ........................................................................................................... 643
Unknown file. ................................................................................................................................................ 643
Multi-sensor error ......................................................................................................................................... 643
Error in cutter position. ................................................................................................................................. 643
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
An error requiring service may have occurred.
Top cover is open.
Top cover is open.
642
The printer has detected that the Top Cover is
open.
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Cause
Write down the error code and message, turn off the printer, and contact your Canon deal-
er for assistance.
Cause
Cause
Corrective Action
Turn off the printer and remove the roll from the printer before re-
storing power.
Turn off the printer, open the Top Cover and remove the tape or
the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds before restor-
ing the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for
assistance.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover again.
If the error occurs again, close the Top Cover, turn off the printer, and wait a while
before restoring power.
Corrective Action
Corrective Action
Corrective Action
iPF765
User's Guide