Other Error Messages - Canon Pixma MX520 Series Online Manual

Follow the procedure below to check the status of the device.
1. Open the Device Manager on your computer as shown below.
If the User Account Control screen is displayed, follow the on-screen instructions.
• In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, then Device
Manager.
• In Windows XP, click Control Panel, Performance and Maintenance, System, then click
Device Manager on the Hardware sheet.
2. Double-click Universal Serial Bus controllers then USB Printing Support.
If the USB Printing Support Properties screen is not displayed, make sure that the machine is
correctly connected to the computer.
Check 3: Make sure that the machine is connected to your computer properly.
3. Click the General tab and make sure that there is no indication of a problem with the device.
If a device error is displayed, refer to Windows help to resolve the error.

Other Error Messages

• Check: If an error message is displayed outside the printer status monitor, check the
following:
• "Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the disk.
• "Could not spool successfully due to insufficient memory"
Quit other running application softwares to increase available memory.
If you cannot print yet, restart your computer and retry printing.
• "Printer driver could not be found"
Uninstall the printer driver according to the procedure described in Deleting the Unnecessary MP
Drivers, and then reinstall it.
• "Could not print Application name - File name"
Try printing again once the current job is complete.
The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed
If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a confirmation screen asking for
permission to send the printer and application software usage information will be displayed every month for
about ten years.
Read the instructions on the screen and follow the procedure below.