Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF765 User Manual

Specifying the Cutting Method for Rolls

3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
tween Pages and
Time, and then click OK.
(See "Paper Detailed Settings Dialog Box(Mac OS
X).")
→P.302

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Automatic The roll is automatically cut by the Cutter Unit follow-
ing printer driver settings.
Choose this setting if you prefer not to have docu-
Eject
ments dropped immediately after printing, as when
waiting for ink to dry.
To cut the roll with the Cutter Unit, press the Cut but-
ton.
Choose this setting when using media that cannot be
Manual
cut using the Cutter Unit.
Cut each page from the roll using scissors. For contin-
uous printing (if you will cut each page later), select
Auto Cut > Yes or select Print Cut Guideline.
(See "Cutting Roll Paper After Printing.")
Paper Cut- Choose this option if you want to cut pages by press-
ing Cutter Unit buttons for manual cutting after printing
ting
when Auto Cut > No is selected or Print Cut Guide-
line is selected in the printer driver.
Otherwise choose this option if you want to cut the roll
edge after loading a roll.
•
Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.
•
Note With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
•
Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the preset
cutting mode.
Cut rolls manually in the following cases:
412
C
D B
Between Scans in
Cutting Method
→P.154
Be-
Drying
Printer Setting
Media Automatic
Menu > Pa-
per Details
Eject
> (Various
Types of
Paper) >
Cutting
Mode
Manual
Cut button Yes
pressed
iPF765
Driver Setting
Auto Cut Yes
Yes
No Yes Print Cut
Guideline
No Print Cut
Guideline
User's Guide