Other Error Messages - Canon MX7600 Service Manual

2-4. Other Error Messages

Message on the LCD
Device memory is full. Cannot
continue process. Reduce the
number of copies to scan.
There is no photo data.
The value exceeds the number
of copies you can print.
The card is currently write-
enabled. Remove card and set
to read-only mode before
performing operation.
Failed to scan Photo Index
Sheet. Check
orientation/position and check
that platen/sheet is clean. <See
manual>
Failed to scan Photo Index
Sheet. Check that all items are
marked correctly. <See
manual>
Failed to scan. Either document
cannot be scanned or is not
placed on the platen glass.
Cover is open. Close cover.
Scanner is not operating
correctly.
Document in ADF. Redo
operation after checking
document in ADF and pressing
[OK].
Document size is too long.
Redo operation after checking
document on ADF and pressing
[OK].
Document size not suitable for
two-sided scanning. Press [OK]
to cancel operation and
discharge document.
Photo Index Sheet cannot be
scanned from ADF.
Cause
The memory is not sufficient to
perform the print job in copying.
Supported image files are not in the
memory card.
During selecting images or specifying
the number of copies, the total print
quantity exceeds the prescribed value
of 999.
With the memory card set to the
Read/write mode, Card Direct printing
operation was attempted from the
menu.
The machine failed in scanning the
Photo Index Sheet.
The machine scanned the Photo Index
Sheet, but markings in the sheet were
incorrect.
The machine failed in scanning the
document for Fit-to-page copy.
The cover was opened during printing. Close the cover. The LCD returns to the display before
The CIS cannot detect the home
position, or the scanner unit warming-
up is not performed properly at power-
on.
The document is left in the ADF.
The document is too long (longer than
the Legal size length) for the ADF, or
the document jams in the ADF.
The paper size is not supported for
scanning on both sides of paper. (Only
the A4, B5, A5, and Letter sizes are
supported.)
The Photo Index Sheet was attempted
to be scanned from the ADF.
Reduce the amount of data to be printed, or print from a
computer.
A temporary error.
- Confirm that supported image files are in the memory
card.
- Images with double-byte characters used in the file
name (or folder name) may not be recognized. Change
the file (or folder) name so that it contains only single-
byte alphanumeric characters.
- If images are edited on a computer, print them from
the computer.
A temporary error. The last operation before the error is
cancelled, and the total print quantity returns to the
value before the error.
A temporary error. Remove the memory card, change
the memory card setting to Read-only, then perform
Card Direct printing.
Press the OK button to clear the error. Confirm the
following, then try again:
- Clean the platen glass, and confirm that the Photo
Index Sheet is not smeared.
- Place the sheet in the correct orientation and position.
Press the OK button to clear the error. Confirm the
following, then try again:
- Fill in all the circles on the Photo Index Sheet
properly.
- Place the sheet in the correct orientation and position.
Press the OK button to clear the error. Correct the
settings, then try the operation again.
the error occurrence.
Press the OK button to clear the error, and turn the
machine off and on again. If the error still occurs, repair
servicing is required.
Remove the document from the ADF, press the OK
button to clear the error, then try the operation again.
Remove the document from the ADF, and press the OK
button to clear the error. Confirm that the document size
is supported, then try the operation again.
Press the OK button to clear the error.
Remove the Photo Index Sheet from the ADF, and press
the OK button to clear the error.
13 / 65
Solution