Canon imagePROGRAF iPF765 User Manual page 453

iPF765
Test
Color Palette
Print
Adjust Head Auto(Standard)
Printer Posi.
Adj.
Auto(Advanced)
Manual
Head Inc. Adj.
Feed Adj. Pri-
Priority ority
Adj.
Quality
Adjust
Length
User's Guide
Setting Item
Automatic
Print Quality
Print Length
Auto(GenuinePpr)
Auto(OtherPaper)
Manual
Adjust- A:High
ment-
B:Standard/Draft
Print
Change A:High
Settings
B:Standard/Draft
Description, Instructions
Print the GL2 color palette.
The printer prints and reads a test pattern for automatic ad-
justment of Printhead alignment relative to the printing direc-
tion. (See "Automatic Adjustment to Straighten Lines and Col-
ors (Head Posi. Adj.).")
→P.548
The printer prints and reads a test pattern for automatic ad-
justment of Printhead alignment relative to the printing direc-
tion and spacing between nozzles and colors. (See "Auto-
matic Adjustment to Straighten Lines and Colors (Head Posi.
Adj.).")
→P.548
Print a test pattern for adjustment of Printhead alignment rel-
ative to the printing direction. Enter the adjustment value
manually based on the resulting pattern. (See "Manual Ad-
justment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.549
Print a test pattern for adjustment of the Printhead orienta-
tion. (See "Adjusting Line Misalignment (Head Inc. Adj.).")
→P.551
Specify exact paper feeding, if desired. Normally, select Au-
tomatic. Choose Print Quality for attractive printing. Choos-
ing Print Quality also makes banding less noticeable.
Choose Print Length if you prefer to feed the paper an exact
amount. However, note that slight banding may occur in the
direction of carriage scanning when Print Length is selec-
ted.
Specify this mode with paper identified in the Paper Refer-
ence Guide.
The printer prints and reads a test pattern for automatic ad-
justment of the feed amount. (See "Automatic Banding Ad-
justment (Adj. Quality).")
→P.556
Specify this mode with paper not in the Paper Reference
Guide.
The printer prints and reads a test pattern for automatic ad-
justment of the feed amount. Note that this function takes
more time and consumes more ink than Auto(GenuinePpr).
(See "Automatic Banding Adjustment (Adj. Quality).")
→P.556
Use this mode with highly transparent media or other paper
for which Auto(GenuinePpr) or Auto(OtherPaper) cannot
be used.
Print a test pattern for adjustment of the feed amount based
on the type of paper. (See "Manual Banding Adjustment (Adj.
Quality).")
→P.557
Print a test pattern for particular types of paper to compen-
sate for paper stretching or shrinkage, after which you enter
the amount of adjustment. (See "Adjusting Line Length (Ad-
just Length).")
→P.559
Displayed when you have selected Feed Priority > Adj. Pri-
ority > Print Length.
Adjustment relative to the amount of stretching or shrinkage
of the current paper.
Enter either the adjustment results from AdjustmentPrint or
the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount by
choosing a higher adjustment value. For paper that tends to
shrink, decrease the feed amount by choosing a lower ad-
justment value.
Menu Settings
453