Output Settings Panel - Canon imagePROGRAF iPF765 User Manual

Output Settings Panel

Output Settings Panel

Output Settings Panel
• Enlarged/Reduced Printing
Select the method for enlarged/reduced printing.
The following settings are available for enlarged/reduced printing.
Fit Paper Size
Fit Roll Paper Width
Scaling
• Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specif-
ic media type is used.
•
Available only if rolls are selected in Paper Source.
Note
• Paper Size
You can select the size of the print media.
•
This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
370
Note
• Print Centered
Select this feature to print the image in the center of a cut sheet or to print left and right margins evenly from
the edges of roll paper.
Setting
Enlarges/reduces the whole page automatically to fit the media size selected for output. Select
the media size to print from Paper Size.
Enlarges/reduces the whole page automatically to fit the width of the roll paper with the page
width.
*Make sure that the width of the roll paper in the printer is set correctly for Roll Paper Width in
the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling value in
numerical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either ▲ button or ▼ button.
*Although Scaling can be set to make the image larger than the media size, the part that does
not fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
Details
iPF765
User's Guide