Canon imagePROGRAF iPF765 User Manual page 503

iPF765
•
If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4
Press ▲ or ▼ to select AppleTalk, and then press the OK button.
5
Press ▲ or ▼ to select On, and then press the OK button.
6
Press the Menu button.
If any of the settings is changed, a confirmation message
is displayed. In this case, press the OK button.
•
Be sure to complete step 6. This will activate the values you have entered.
Important
•
By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer zone name.
For details on RemoteUI, see "Using RemoteUI."
Note
Configuring the Destination (Mac OS X)
•
AppleTalk is supported in Mac OS X 10.2.8–10.4.
Important
•
The following procedures are based on Mac OS X 10.4. The method of configuring the destination varies depending on
the version of Mac OS X.
Note
•
The imagePROGRAF printer driver is not compatible with AppleTalk.
1
In System Preferences, click Network to display the Network window.
User's Guide
Configuring the Destination for AppleTalk Networks
→P.483
503