Canon imagePROGRAF iPF765 User Manual page 456

Menu Settings
GL2 Set- Line &
tings Pen
Manager
Proces-
singOp-
tion
GL2 Set Print
Interface EOP Timer
Setup
TCP/IP
456
NetWare
AppleTalk
Setting Item
AdjustFaintLines
Warning
On-the-Fly
PageSizeProcess1
PageSizeProcess2
IPv4 IPv4 Mode
Protocol DHCP
BOOTP
RARP
IPv4 IP Address
Settings
Subnet Mask
Default G/W
DNS DNS Dync update
Settings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Settings Dync
update
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
NetWare
Frame Type
Print Service
Description, Instructions
If fine lines are printed in colors that do not match the colors
of other shapes, selecting Off may help produce the expec-
ted results. However, lines in some colors may appear bro-
ken.
Select On to have any GL2-related warnings displayed.
Selecting On will start printing jobs sooner if you are printing
only HP RTL print jobs and printing would not start until later.
However, images may be incomplete in some cases, so be
sure to check the printing results.
Normally, the area available for printing excludes a margin
required by the printer, and images are positioned according-
ly. Selecting On in this setting eliminates any misalignment of
the printing position if the image itself includes a border.
Selecting On will determine the paper size based on the im-
age rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Specify the protocol used to configure the IP address auto-
matically.
Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
Specify whether DNS server registration is updated automati-
cally.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated automati-
Addr cally.
State-
less
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To apply your
changes, choose Register Setting.
iPF765
User's Guide