Canon iPF6100 Service Manual page 67

MEMO:
If the nozzles are clogged or an ink suction problem occurs, white lines can appear on the printout a constant
frequency or color dulling can occur. If this problem is not resolved by cleaning operations, replace the
printhead with a new one.
[2]
[3]
[1] knob
[2] protective cap 1
[3] protective cap 2
2. Capping
The printer will perform the capping operation when printing has ended or during standby due to an error, in
order to protect the printhead and avoid ink leakage.
If the power cord is accidentally unplugged, turn off the Power button, reconnect the power cord, and then
turn on the Power button. Confirm that the printer starts up properly and enters to the "Online" or "Offline"
status, and then power off the printer using the Power button.
Improper "capping operation" may cause clogged nozzles due to dried ink or ink leakage from the printhead.
[1]
[5]
F-1-30
T-1-24
[4] nozzles
[5] Electrical contact
[6] ink port
Chapter 1
[4]
[6]
1-55