Canon iPF6100 Service Manual page 194

Chapter 4
c) Removing the cutter mounting plate
1) Remove the cutter unit.
2) Remove two screws[1] and connector[2] and free the harness from harness guide[3] to remove cutter
mounting plate[4].
d) Removing the cutter drive unit
1) Remove the cutter unit.
2) Remove two screws[1] and two connectors[2] and free the harness from harness guide [3] to remove cutter
drive unit[4].
4-22
[2] [4]
F-4-38
[4] [3]
[1]
F-4-39
[3]
[1]
[2]