Basic Operation; Operation Panel - Canon iPF6100 Service Manual

1.6 Basic Operation

1.6.1 Operation Panel

This section explains the functions of the buttons and the meanings of the LEDs on the operation panel.
[1]
[2]
[4] [3]
[5]
[6]
[7]
[8]
[1] Data lamp
Blinking: Indicates that a print job is being received or processed if the printer is printing, or that a print job
has paused or firmware data is being if the printer is not printing.
Off: No print job is available.
[2] Message lamp
On: Indicates that a warning message is on display.
Blinking: Indicates that an error message is on display.
Off: The printer is normal or is turned off.
[3] Cut sheet lamp (green)
On: Either the paper tray or paper tray front loading port is selected as a paper source.
Off: Roll media are selected as a paper source.
[4] Roll media lamp (green)
On: Roll media are selected as a paper source.
Off: Either the paper tray or paper tray front loading port is selected as a paper source.
[5] Online button
Toggles the printer mode between online and offline.
On: Online mode.
Blinking: Emerging from sleep mode.
Off: Offline mode.
[6] Paper source button
Selects a paper source. Each time this button is pressed, the paper source toggles between roll media (roll
media source) and cut sheet (paper tray or paper tray front loading port), with the paper source selector lamp
illuminating.
[7] Menu button
Displays the printer main menu.
[8] Information button
Displays the printer submenu. Each time this button is pressed, information about the inks and paper is
displayed.
[18]
[9] [10] [11]
F-1-24
Chapter 1
[17]
[13]
[12]
0016-8164
[16]
[15]
[14]
1-27