Canon iPF6100 Service Manual page 166

(10) Hang the holes [2] in the back of the Output
Stacker [1] on both sides over the hooks [4] on the
top of the Basket Arms [3], and then hang the loops
[5] in the middle of the Output Stacker on both sides
over the hooks [6] in the middle of the Basket Arms.
[3]
[5]
[6]
[1]
F-3-47
(11) Insert the Support Rod [1] in the insertion slot
[2] of the Support Rod Holder. Passing it through the
bottom of the Output Stacker, insert it in the Support
Rod Holder on the opposite side. Normally, use the
stacker in this position.
F-3-48
[4]
[2]
[1]
[3]
[2]
[1]
Chapter 3
3-15