2. Moving the Wiper Unit
1) Open the top cover, and then remove the roll feed unit, output guide, right circle cover, right upper cover,
operation panel, mist filter, exhaust filter, right cover, right front cover, cover guide, cover plate(right). Refer to
DISASSEMBLY/REASSEMBLY > points to Note on Disassembly and Reassembly > External Cover.
2) To move the wiper unit[3], turn the gear[1] of the purge unit[2] in the direction of the arrow.
4.3.17 Opening/Closing the Ink Supply Valve
1) Open the top cover, and then remove the left circle cover and tank cover.
2) To open the ink supply valve, turn the cam [2] in the direction of the arrow and press the link [1].
[2]
[1]
F-4-106
[2]
F-4-107
Chapter 4
[3]
[2]
[1]
0012-6413
4-61