Canon iPF6100 Service Manual page 126

Chapter 2
2.3.3.2.5 Manual Feed (from Rear) Sequence
This sequence can be performed according to the messages shown on the operation panel only when a specific
type of media is selected after selecting the manual feed mode from the menu shown on the operation panel.
When the cut sheet loaded at the back of the printer is detected by the sensor, the printer starts feeding the cut
sheet. After this, the printer performs various adjustments and detection using the multi sensor, thus completing
the paper pick-up operation.
During printing, the cut sheet is fed by controlling the rotation of the feed roller according to the selected print
mode.
*1
The auto roll feed unit starts feeding the cut sheet when the roll media detection sensor detects the media.
When the auto roll feed unit is not mounted, the printer starts feeding the media when the paper detection
sensor detects the media.
2-48
Cut sheet loading
(manual)
Detection of cut sheet *1
Light intensity/
Head hight adjustment
Detection of paper width
Detection of skewed movement of paper
End of cut sheet pick-up operation
Printing
F-2-31
0013-4176