Canon iPF6100 Service Manual page 358

Display massage
ERROR E141-4041
Call for service.
ERROR E141-4042
Call for service.
ERROR E141-4045
Call for service.
ERROR E141-404C
Call for service.
ERROR E141-404D
Call for service.
ERROR E141-401C
Call for service.
ERROR E141-401D
Call for service.
ERROR E141-401E
Call for service.
ERROR E141-404B
Call for service.
Code* Condition detected
E196-4041 Flash memory erase error
E196-4042 Flash memory write error
E196-4045 EEPROM write error
E196-404C Serial number mismatch
between boards
E196-404D Machine ID mismatch
between boards
E198-401C RTC error
E198-401D RTC low battery error
E198-401E RTC clock stop
E199-404B Temperature/humidity
sensor board connector out
of position
Action
Replace the main controller PCB
Replace the main controller PCB
Replace the main controller PCB
Retry PCB replacement mode.
Check the main controller PCB.
Replace the lithium battery/Replace the
main controller PCB.
Replace the lithium battery/Replace the
main controller PCB.
Replace the lithium battery/Replace the
main controller PCB.
Restart in service mode.
Chapter 8
8-25