Chapter 4
4.3.2 Moving the carriage manually
Move the carriage as required during disassembly/reassembly to prevent the carriage form contacting the parts
to be removed.
The carriage does not move when capped. When uncapping moving the carriage, refer to the procedures in
DISASSEMBLY/REASSEMBLY>Points to Note on Disassembly and Reassembly>Opening the Cap/Moving
the Wiper Unit.
4.3.3 Units requiring draining of ink
When disassembling the following units of the ink passage, drain ink complateil to prevent it from leaking. For
how to drain ink, refer to DISASSEMBLY/REASSEMBLY > Pointe to Note on Disassembly and Reassembly
> Draining the Ink.
[1] Carriage unit
Refer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Carriage Unit.
[2] Ink tank unit
Refer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Ink Tank Unit.
4-2
[2]
F-4-3
[1]
0012-6350
0012-6351