Canon iPF6100 Service Manual page 341

Chapter 8
Display massage
Paper size not 03010000-200C
detected.
Press Load/Eject
and reload the
paper.
Paper loaded 03016000-2010
askew.
Press Load/Eject
and reload the
paper.
Cannot adjust 03010000-2822
eccentric.
Press Online to
clear the error.
Cassette printing 03860200-2E02
is selected.
Press Load/Eject
and load sheets.
Roll printing is 03860200-2E0A
selected, but sheets
are loaded.
Press Load/Eject
and
remove the sheets.
Roll printing 03060A00-2E00
is selected.
Press Load/Eject
and load a roll.
No Roll Feed Unit. 03060A00-2E0E
Turn printer off
and install roll
feed unit.
The roll is empty. 03060A00-2E1B
Load/Eject:
Change Paper
8-8
Code* Condition detected
Roll media loading size detection
failure
Skewed roll media
Eccentricity correction disabled
Data with a cut sheet specification
has been received but no cut sheets
are loaded.
Data with a roll media
specification has been received
when a cut sheet tray is loaded.
Data with a roll media
specification has been received but
no roll media are loaded.
Roll media unit not installed
Roll media end
Action
Reload the roll media.
Rewind the roll media and
reload them.
Check to see if paper has not
jammed.
Load cut sheets at the paper tray
port.
Replace with roll media.
Load roll media.
Install the roll media unit.
Renew the supply of roll media.