Canon iPF6100 Service Manual page 109

Details of the cleaning function are shown in the table below.
Name of Service mode
Cleaning
or PRINT INF
mode
(Name of Main Menu)
Cleaning 1 CLN-A-1/CLN-M-1
(Head Cleaning A)
Cleaning 2 CLN-A-2
Cleaning 3 CLN-A-3
Cleaning 4 CLN-M-4
(Replace P.head)
Cleaning 5 CLN-M-5
(Move Printer)
Cleaning 6 CLN-A-6/CLN-M-6
(Head Cleaning B)
Cleaning 7 CLN-A-7
Cleaning CLN-A-10
10 (Move Printer)
Cleaning CLN-A-11
11
Cleaning CLN-A-15
15
Cleaning CLN-A-16
16
Cleaning CLN-A-17
17
T-2-4
Operation
Normal cleaning
Ink level adjustment and cleaning Adjust the ink level in the head by suction, and
Initial filling ink
Ink drainage for head replacement Drains ink to replace the head (drains only the ink
Ink drainage for secondary
transport
Normal (strong) cleaning
Aging
Ink filling after secondary
transport
Ink filling after head replacement Performs normal cleaning after head replacement
Dot count suction
Precipitated ink agitation
Cleaning (weak)
Description of cleaning
Removes dried ink from nozzles, thick ink
accumulated on the face, and paper particles.
then performs normal cleaning.
Fills the empty tube (during initial installation)
with ink, and then performs normal cleaning.
in the head).
Drains ink from the head and tube for secondary
transport.
Performs suction stronger than when adjusting
the ink filling amount in the head or normal
cleaning to unclog nozzles.
Performs idle ejection after replacement of the
head.
Fills the empty tube (during installation after
secondary transport) with ink, and performs
normal cleaning.
and ink filling.
Performs suction to remove ink adhered to dried
nozzles and thick ink accumulated on the face
when the dot count reaches the prescribed value.
Performs the agitation (ink supply valve open/
close) operation to prevent the ink ingredient
from precipitating.
Performs cleaning weaker than normal cleaning
to unclog nozzles.
Chapter 2
2-31