Canon iPF6100 Service Manual page 125

Chapter 2
2.3.3.2.4 Manual Feed (from Front) Sequence
0013-4174
This sequence can be performed according to the messages shown on the operation panel only when a specific
type of media is selected after selecting the manual feed mode from the menu shown on the operation panel.
When a cut sheet is loaded according to the message shown on the operation panel, the printer performs various
adjustments and detection using the multi sensor and then feeds the cut sheet to the rear of the printer. At this
time, the multi sensor detects skewed feeding and leading edge of the cut sheet, thus completing the paper pick-
up operation.
During printing, the cut sheet is fed by controlling the rotation of the feed roller according to the selected print
mode.
Cut sheet loading
(manual)
Light intensity/
Head hight adjustment
Detection of paper width
Back feed
Detection of skewed movement of paper
End of cut sheet pick-up operation
Printing
F-2-30
2-47